The Air X wind generator 400w is a great starter model to accompany an existing solar panel installation or as a power source for a small cabin. These units are also available in marine versions, set to withstand the salt spray of the ocean either on land or on your boat.
These units are tested and proven very effective at our own home. In fact, this is the very first wind turbine that we ever owned. They provide power at low wind speeds and product maximum power at 28 mph. During a good storm one of these air x wind generators fill our batteries for our home completely. Airx 400w wind generators.
The AIR x is by far the world’s number one selling small wind turbine. In late 2001 we introduced an entirely new level of technology which previously was only found in today’s state-of-the-art mega-watt-class wind turbines.
The AIR-X incorporates a new microprocessor based technology that results in increased performance, improved battery charging capability, greater reliability and the reduction of “flutter” noise from the machine.
The controller allows for peak-power tracking of the wind by optimizing the alternator’s output on all points of the cubic curve and efficiently delivers the energy to the battery. The turbine’s smart controller allows it to actually control blade rotation speed thus eliminating the buzzing noise commonly found with most small wind turbines. This is a huge advantage over other very noisy wind generator units.
Much Lower Noise: Previous AIR wind modules relied on their aero-elastic blade design for protection in high winds. This caused a loud flutter noise in winds above 35 mph (16 m/s). AIR-X’s circuit monitors the wind speed and electronically slows the blades as it reaches its rated output preventing it from going into flutter. This results in a much quieter wind turbine. In high winds, the AIR-X will continue to produce power at a reduced level until the wind decreases, at which point maximum potential output will resume.
Improved battery charging: Previous AIR designs required 300-400 amp hour battery banks so the trickle charge of the wind turbine could be adequately absorbed. The AIR-X’s charge controller periodically stops charging, reads the battery voltage, compares it to the voltage setting and if the battery is charged, it completely shuts off all current going to the battery. This function is performed within a few milliseconds. The closer the battery is to reaching its full state of charge, the more often the AIR-X’s circuit repeats this action. This means any size battery bank from 25 to 25,000 amp hours or higher can be charged safely. When the battery has reached its charged state, the AIR-X will slow to an almost complete stop. Only when the battery has dropped below its voltage set point will it startup and resume charging.
The AIR-X is an ideal product for the person that needs a little power for basic appliances such as TV, radio and a few lights.
Common applications for the AIR-X
Remote Cabins, Telecommunication Towers, The Developing World, Monitoring Stations,
*Unprecedented 3-YEAR WARRANTY on air x wind generator, Carbon Fiber Composite Blades, Aircraft quality aluminum alloy castings, Exclusive Brush-less neodymium cubic curve alternator,
*Sophisticated internal battery charge regulator, and they are Maintenance-free – Only two moving parts.
Southwest windpower Whisper 200 and 500 wind generators feature a patented side furling angle governor to protect the generator in high winds by turning the alternator and blades out of the wind. Other features include field adjustable voltage, a four bearing spindle for efficiency, upgraded yaw shaft and a new bushing for smoother operation. Voltage is factory set at 24 Vdc and is adjustable to 12/36/48 Vdc.
High voltage versions of the Whisper 200 and 500 produce 220 VAC transmitting to a step down transformer that changes it to nominal system voltage (transformer sold separately). High voltage versions are used in applications where there is a long distance from the turbine to the batteries.
Every Whisper 100 and 200 comes with the Whisper Charge Controller. The SCR-based shunttype controller, housed in a single unit, is dedicated to wind only. LED lights indicate regulation operation and Power ON.