- Empty cart.
- Continue Shopping
A Solar Panel Tracker is a very cost effective way to harness the power of the sun, requiring fewer panels, they work great in irrigation and stand alone systems, especially off grid applications. We have tested these installations extensively and found they work great and are very reliable. Wattsun Trackers provide you with more solar power for less money. Your power is harvested in a smooth dawn to dusk flow. Wattsun Trackers maximize your investment in solar power.
Trackers can be used for any solar tracker application. We make trackers for water pumping, remote homes, or village and industrial power. Our tracker control systems are not limited to Wattsun PV Trackers.
Controls are used in exposure testing, small dish concentrators, solar day-lighting systems, solar thermal arrays, and have even been suspended below balloons attempting to circumnavigate the globe.
A Tilt and Roll Tracker for Four or Ten Module Systems Features:
Up to six 120W or ten 85W modules, Compatible with 12, 24 or 48V systems, Fast installation of solar panel tracker, Reliable operation in wind or cold, Solid state electronic tracker control, Linear Actuator drive, Structural aluminum module support frame, Ships in four boxes via UPS.
The TR-75 is perfect for small battery charging or water pumping applications.
Wattsun Trackers offer a significant increase in the amount of water pumped and provide a smooth flow of water from dawn to dusk. The gallons per day increase is greatest in the summer when it is needed the most.
The Wattsun Tracker Controller – solar tracker used to power the drive moter on the TR-75 is identical to the Single-Axis supplied with our larger drives. If your TR-75 System Voltage is not 24VDC then you will need a Wattsun Voltage Converter .
The TR-75 is a tilt and roll tracker and automatically tracks the sun. The elevation tilt is manually adjustable and it tracks from the east to west around the north-south axis. Wattsun Tilt and Roll Trackers automatically track the sun from East to West. Our Tilt and Roll, Single-Axis, Linear Actuator Drive is designed for small, two module arrays.
The tracker is now Universal – meaning that it can mount nearly any standard 40 to 85 watt modules. However, do not try to mount any modules larger than 85 watts.
Doing so will overload the actuator and void your warranty. The frames are fabricated from sturdy structural aluminum and engineered for rigidity. The Single-Axis, Linear Actuator Drive is perfect for small, two panel water pumping applications. Wattsun Trackers offer a significant increase in the amount of water pumped and provide a smooth flow of water from dawn to dusk. The increase is greatest in the summer when it is needed the most. Solar trackers are very much appreciated in this application especially.
The solid state electronics and positive drive mechanisms of all out trackers are unaffected by wind or cold , an important concern for remote or water pumping applications. Our tracker frames are precisely engineered for strength, are fabricated from structural aluminum and disassemble for ease in shipping and installation. The Tilt and Roll, Single-Axis, Linear Actuator Drive can ship via up’s for added savings.
Up to twelve 120W or eighteen 75W modules, Compatible with any PV system voltage, 270 degrees of Azimuth tracking available, Fast installation, Reliable operation in wind or cold, Solid state electronic tracker control, High quality, worm and gear drive. Structural aluminum module support frame.
AZ-125, Azimuth Trackers for Four to 18 Module Systems Features:
The Wattsun AZ-125 Gear Drive, azimuth tracker automatically tracks the sun by rotating the PV array about the pipe mast. Then it tilts for elevation position.
The Dual-Axis Option enables it to capture virtually all the power the sun delivers. Compared to passive, tilt and roll trackers, azimuth trackers provide greater stability for large arrays. The corners do not protrude down towards the ground or stick up in the air to catch the wind. The bottom edge of the array always remains parallel to the ground and requires less ground clearance than tilt and roll designs. Our standard Azimuth Trackers provide nearly 270 degrees of rotational movement and can tilt to 75 degrees.
Custom trackers can be ordered to track up to a full 360 degrees. Up to 18 – 120W or 24 – 75W modules. Compatible with any PV system voltage above 24VDC. 270 degrees of Azimuth tracking available. Fast installation.
The Wattsun AZ-225 Gear Drive, azimuth tracker automatically tracks the sun by rotating the PV array about the pipe mast. Then it tilts for elevation. The Dual-Axis Option (included) enables it to capture virtually all the power the sun delivers.
